9 material differences · fewer than 12
Tractor oneSOMECA 350 V1971–1976No measured PTO figureTractor twoURSUS C-3301967–1987No measured PTO figure
Which should you choose?
Read our verdict on the 350 V and the C-330 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 350 V | C-330 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 32.6 hp | 30.0 hp | +8% 350 V |
| Engine declared | FIAT-IVECO 8025.02.001 | URSUS S-312 C | differs |
| Displacement declared | 1.73 L | 1.96 L | +14% C-330 |
| Maximum torque declared | 82 lb·ft · 111 N·m | 74 lb·ft · 100 N·m | +11% 350 V |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 14.9 mph · 24 km/h | — |
| Clutch declared | Pedal operated dry FERODO double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 3.8 gpm · 14.4 L/min | 5.3 gpm · 20.0 L/min | +39% C-330 |
| Pressure declared | 2,843 psi · 196 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 2,972 lb · 1,348 kg | 3,693 lb · 1,675 kg | +24% C-330 |
| Maximum permissible mass declared | — | 4,145 lb · 1,880 kg | — |
| Wheelbase declared | 69.9 in · 1,776 mm | 73.6 in · 1,870 mm | +5% C-330 |
| Length declared | 118.9 in · 3,020 mm | 121.3 in · 3,080 mm | — |
| Width declared | 36.6–57.9 in · 930–1,470 mm | 58.7 in · 1,490 mm | differs |
| Ground clearance declared | 11.4 in · 290 mm | 15.7 in · 400 mm | +38% C-330 |
| Turning radius, braked declared | 7.2 ft · 2.20 m | 10.6 ft · 3.22 m | +46% C-330 |
| Fuel tank declared | 35.9 qt · 34.0 L | 37.0 qt · 35.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
SOMECA 350 V sources
Source
- Source: Traktorenlexikon, “Someca 350 V”
- Source: Traktorenlexikon, “Fiat 350/350 DT”
URSUS C-330 sources
Source
- Source: Traktorenlexikon, “Ursus C-330”
- Source: Traktorenlexikon, “Ursus C-335”