8 material differences · fewer than 12
Tractor oneSchlüter S 450 (S 450 V)1962–1966No measured PTO figureTractor twoVALMET 361 D1960–1965No measured PTO figure
Which should you choose?
Read our verdict on the S 450 (S 450 V) and the 361 D → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | S 450 (S 450 V) | 361 D | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 41.3 hp | 41.4 hp | — |
| Engine declared | — | VALMET 310 D or 310 A | — |
| Displacement declared | — | 2.69 L | — |
| Maximum torque declared | 123 lb·ft · 167 N·m | 116 lb·ft · 157 N·m | +6% S 450 (S 450 V) |
| Transmission | |||
| Top speed declared | 12.4–17.4 mph · 20–28 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | Pedal operated dry single plate clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 5.8 gpm · 22.0 L/min | — |
| Rear PTO speeds declared | 615/1230 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,960–5,126 lb · 2,250–2,325 kg | 3,902 lb · 1,770 kg | differs |
| Maximum permissible mass declared | 5,071 lb · 2,300 kg | — | — |
| Wheelbase declared | 78.7 in · 2,000 mm | 74.6 in · 1,895 mm | +6% S 450 (S 450 V) |
| Length declared | 122.6 in · 3,115 mm | 114.6 in · 2,910 mm | +7% S 450 (S 450 V) |
| Width declared | 63.7 in · 1,618 mm | 67.9–88.2 in · 1,725–2,240 mm | differs |
| Ground clearance declared | 15.0 in · 380 mm | 17.7 in · 450 mm | +18% 361 D |
| Turning radius, braked declared | 9.8 ft · 3.00 m | 10.0 ft · 3.04 m | — |
| Fuel tank declared | — | 40.2 qt · 38.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Schlüter S 450 (S 450 V) sources
- Source: Traktorenlexikon, “Schlüter S 450 / 450 V”
VALMET 361 D sources
- Source: Traktorenlexikon, “Valmet 361 D”