11 material differences · fewer than 12
Tractor oneSchlüter Compact 950T (TV)1971–1974No measured PTO figureTractor twoSOMECA 1000 (TD)1971–1977No measured PTO figure
Which should you choose?
Read our verdict on the Compact 950T (TV) and the 1000 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Compact 950T (TV) | 1000 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 94 hp | 93.7 hp | — |
| Engine declared | Schlüter SDMT 110 W4 | FIAT-IVECO 8065.02.007 | differs |
| Displacement declared | 4.75 L | 5.18 L | +9% 1000 (TD) |
| Maximum torque declared | 301 lb·ft · 408 N·m | 226 lb·ft · 306 N·m | +33% Compact 950T (TV) |
| Transmission | |||
| Top speed declared | 16.8 mph · 27.0 km/h | 15.5 mph · 25 km/h | +8% Compact 950T (TV) |
| Clutch declared | Single-disc dry clutch | Pedal operated two stage dry FERODO double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 12.3 gpm · 46.5 L/min | — |
| Rear PTO speeds declared | 582/972 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,959 lb · 3,610 kg | 7,771 lb · 3,525 kg | — |
| Wheelbase declared | 92.4 in · 2,346 mm | 97.6 in · 2,480 mm | +6% 1000 (TD) |
| Length declared | 155.5 in · 3,950 mm | 164.2 in · 4,170 mm | +6% 1000 (TD) |
| Width declared | 80.7 in · 2,050 mm | 78.7–99.7 in · 1,998–2,532 mm | differs |
| Ground clearance declared | 15.9 in · 405 mm | 22.5 in · 571 mm | +41% 1000 (TD) |
| Turning radius, braked declared | 11.8 ft · 3.60 m | 12.5 ft · 3.81 m | +6% 1000 (TD) |
| Fuel tank declared | — | 124.7 qt · 118.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Schlüter Compact 950T (TV) sources
- Source: Traktorenlexikon, “Schlüter Compact 950T /950TV”
- Source: Traktorenlexikon, “Schlüter Compact 1050T /1050TV”
SOMECA 1000 (TD) sources
- Source: Traktorenlexikon, “Someca 1000”
- Source: Traktorenlexikon, “Fiat 1000/1000 DT”