11 material differences · fewer than 12

Tractor oneSAME Silver 100.6 DT1995–2004No measured PTO figureTractor twoVALMET 6550 HiTech1998–2006No measured PTO figure

Which should you choose?

Read our verdict on the Silver 100.6 DT and the 6550 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

SAME Silver 100.6 DT and VALMET 6550 HiTech, field by field
Field	Silver 100.6 DT	6550 HiTech	Gap
Engine
Engine power, claimed claimed	98.6 hp	98.6 hp	—
Engine declared	SAME-DEUTZ-FAHR 1000.6 A 1	VALMET 420 DWRE or 44 ET	differs
Displacement declared	6.00 L	4.40 L	+36% Silver 100.6 DT
Maximum torque declared	249 lb·ft · 337 N·m	—	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Electrically-operated dry single-disc clutch	—
Hydraulics & hitch
Pump flow declared	15.1 gpm · 57.0 L/min	18.7 gpm · 70.8 L/min	+24% 6550 HiTech
Pressure declared	2,176 psi · 150 bar	—	—
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,877 lb · 4,480 kg	10,406 lb · 4,720 kg	+5% 6550 HiTech
Maximum permissible mass declared	15,432 lb · 7,000 kg	16,535 lb · 7,500 kg	+7% 6550 HiTech
Wheelbase declared	103.7 in · 2,635 mm	92.1 in · 2,340 mm	+13% Silver 100.6 DT
Length declared	175.4 in · 4,455 mm	178.0 in · 4,520 mm	—
Width declared	78.0–103.1 in · 1,980–2,620 mm	92.9 in · 2,360 mm	differs
Height, over the cab declared	107.7 in · 2,735 mm	107.1 in · 2,720 mm	—
Ground clearance declared	18.7 in · 475 mm	17.1 in · 434 mm	+9% Silver 100.6 DT
Turning radius, braked declared	12.8 ft · 3.91 m	—	—
Fuel tank declared	158.5 qt · 150.0 L	174.4 qt · 165.0 L	+10% 6550 HiTech

Source

Source