SAME Mercury 85 Export (DT) vs VALMET 665

11 material differences · fewer than 12

Tractor one

1981–1985

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the Mercury 85 Export (DT) and the 665 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 7 fields identical or within 5%, which is not counted as material

SAME Mercury 85 Export (DT) and VALMET 665, field by field
Field	Mercury 85 Export (DT)	665	Gap
Engine
Engine power, claimed claimed	82 hp	78.9 hp	—
Engine declared	SAME DA 1054 P	VALMET 420 D	differs
Displacement declared	4.15 L	4.40 L	+6% 665
Maximum torque declared	218 lb·ft · 295 N·m	214 lb·ft · 290 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Dry SAME double clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Pump flow declared	10.8 gpm · 41.0 L/min	13.8 gpm · 52.4 L/min	+28% 665
Pressure declared	2,973 psi · 205 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	8,157 lb · 3,700 kg	5,688 lb · 2,580 kg	+43% Mercury 85 Export (DT)
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	7,209 lb · 3,270 kg	7,231 lb · 3,280 kg	—
Wheelbase declared	91.3 in · 2,320 mm	94.1 in · 2,390 mm	—
Length declared	151.2 in · 3,840 mm	157.5 in · 4,000 mm	—
Width declared	76.0 in · 1,930 mm	79.9 in · 2,030 mm	—
Height declared	109.4 in · 2,780 mm	101.2 in · 2,570 mm	+8% Mercury 85 Export (DT)
Ground clearance declared	20.9 in · 530 mm	18.1 in · 460 mm	+15% Mercury 85 Export (DT)
Turning radius, braked declared	11.5 ft · 3.50 m	15.7 ft · 4.80 m	+37% 665
Fuel tank declared	126.8 qt · 120.0 L	77.1 qt · 73.0 L	+64% Mercury 85 Export (DT)

Source

Source