SAME Mercury 85 Export (DT) vs VALMET 6100-4

13 material differences

Tractor one

1981–1985

No measured PTO figure

Tractor two

1991–1994

No measured PTO figure

Which should you choose?

Read our verdict on the Mercury 85 Export (DT) and the 6100-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 5 fields identical or within 5%, which is not counted as material

SAME Mercury 85 Export (DT) and VALMET 6100-4, field by field
Field	Mercury 85 Export (DT)	6100-4	Gap
Engine
Engine power, claimed claimed	82 hp	77.9 hp	—
Engine declared	SAME DA 1054 P	VALMET 320 DS	differs
Displacement declared	4.15 L	3.30 L	+26% Mercury 85 Export (DT)
Maximum torque declared	218 lb·ft · 295 N·m	229 lb·ft · 310 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Dry SAME double clutch	Pedal-operated, dry Fichtel & Sachs single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	10.8 gpm · 41.0 L/min	21.2 gpm · 80.3 L/min	+96% 6100-4
Pressure declared	2,973 psi · 205 bar	2,031–2,248 psi · 140–155 bar	differs
Three-point lift at ends declared	8,157 lb · 3,700 kg	9,601 lb · 4,355 kg	+18% 6100-4
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,209 lb · 3,270 kg	8,818 lb · 4,000 kg	+22% 6100-4
Maximum permissible mass declared	—	13,889 lb · 6,300 kg	—
Wheelbase declared	91.3 in · 2,320 mm	90.6 in · 2,302 mm	—
Length declared	151.2 in · 3,840 mm	169.1 in · 4,295 mm	+12% 6100-4
Width declared	76.0 in · 1,930 mm	85.2 in · 2,165 mm	+12% 6100-4
Height declared	109.4 in · 2,780 mm	106.1 in · 2,695 mm	—
Ground clearance declared	20.9 in · 530 mm	16.1 in · 410 mm	+29% Mercury 85 Export (DT)
Turning radius, braked declared	11.5 ft · 3.50 m	13.1 ft · 4.00 m	+14% 6100-4
Fuel tank declared	126.8 qt · 120.0 L	167.0 qt · 158.0 L	+32% 6100-4

Source

Source