SAME Laser 110 (DT) vs VALMET 8050

12 material differences

Tractor one

1983–1996

No measured PTO figure

Tractor two

1995–2004

No measured PTO figure

Which should you choose?

Read our verdict on the Laser 110 (DT) and the 8050 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

SAME Laser 110 (DT) and VALMET 8050, field by field
Field	Laser 110 (DT)	8050	Gap
Engine
Engine power, claimed claimed	107.5 hp	108.5 hp	—
Engine declared	SAME 1006 P	VALMET 620 DSR or 620 DSRE	differs
Displacement declared	5.66 L	6.59 L	+17% 8050
Maximum torque declared	269 lb·ft · 365 N·m	340 lb·ft · 461 N·m	+26% 8050
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–31.1 mph · 30–50 km/h	differs
Clutch declared	Pedal operated dry SAME single disc clutch	Pedal-operated dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	16.9 gpm · 64.0 L/min	18.8 gpm · 71.0 L/min	+11% 8050
Three-point lift at ends declared	10,141 lb · 4,600 kg	14,110 lb · 6,400 kg	+39% 8050
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,568 lb · 4,340 kg	10,450 lb · 4,740 kg	+9% 8050
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	108.9 in · 2,767 mm	100.7 in · 2,558 mm	+8% Laser 110 (DT)
Length declared	158.9 in · 4,035 mm	187.3 in · 4,757 mm	+18% 8050
Width declared	83.5 in · 2,120 mm	84.8 in · 2,155 mm	—
Height declared	106.1 in · 2,695 mm	108.3 in · 2,750 mm	—
Ground clearance declared	23.6 in · 600 mm	18.7 in · 475 mm	+26% Laser 110 (DT)
Turning radius, braked declared	11.2 ft · 3.40 m	—	—
Fuel tank declared	137.4 qt · 130.0 L	174.4 qt · 165.0 L	+27% 8050

Source

Source