SAME Laser 100 (DT) vs VALMET 8000

12 material differences

Tractor one

1986–1991

No measured PTO figure

Tractor two

1991–1996

No measured PTO figure

Which should you choose?

Read our verdict on the Laser 100 (DT) and the 8000 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

SAME Laser 100 (DT) and VALMET 8000, field by field
Field	Laser 100 (DT)	8000	Gap
Engine
Engine power, claimed claimed	96.7 hp	96.7 hp	—
Engine declared	SAME 1055-P	VALMET 620 D	differs
Displacement declared	5.20 L	6.59 L	+27% 8000
Maximum torque declared	242 lb·ft · 328 N·m	270 lb·ft · 366 N·m	+12% 8000
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry SAME single-disc clutch	—	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	17.4 gpm · 66.0 L/min	17.5 gpm · 66.4 L/min	—
Pressure declared	1,740 psi · 120 bar	2,901 psi · 200 bar	+67% 8000
Three-point lift at ends declared	10,141 lb · 4,600 kg	9,469 lb · 4,295 kg	+7% Laser 100 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,686 lb · 3,940 kg	10,053 lb · 4,560 kg	+16% 8000
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	103.0 in · 2,617 mm	100.7 in · 2,558 mm	—
Length declared	153.0 in · 3,885 mm	186.6 in · 4,740 mm	+22% 8000
Width declared	77.0 in · 1,957 mm	85.4 in · 2,170 mm	+11% 8000
Height declared	106.4 in · 2,702 mm	107.1 in · 2,720 mm	—
Ground clearance declared	20.7 in · 527 mm	14.0 in · 355 mm	+48% Laser 100 (DT)
Turning radius, braked declared	11.0 ft · 3.35 m	15.5 ft · 4.71 m	+41% 8000
Fuel tank declared	126.8 qt · 120.0 L	167.0 qt · 158.0 L	+32% 8000

Source

Source