SAME Explorer 80 II (DT) vs VALMET 655/655-4
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the Explorer 80 II (DT) and the 655/655-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Explorer 80 II (DT) | 655/655-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 78.9 hp | 78.9 hp | — |
| Engine declared | SAME 1000.4 A 1 | VALMET D 44 D-7 | differs |
| Displacement declared | 4.00 L | 4.40 L | +10% 655/655-4 |
| Maximum torque declared | 204 lb·ft · 276 N·m | 221 lb·ft · 300 N·m | +9% 655/655-4 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 10.7 gpm · 40.5 L/min | — | — |
| Pressure declared | 1,740 psi · 120 bar | — | — |
| Three-point lift at ends declared | — | 9,921 lb · 4,500 kg | — |
| Rear PTO speeds declared | 540/540E/1000E/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,724 lb · 3,050 kg | 8,289 lb · 3,760 kg | +23% 655/655-4 |
| Wheelbase declared | 95.1 in · 2,415 mm | 93.9 in · 2,385 mm | — |
| Length declared | 144.5 in · 3,670 mm | 177.8 in · 4,515 mm | +23% 655/655-4 |
| Width declared | 81.1 in · 2,060 mm | 83.9 in · 2,130 mm | — |
| Height declared | 102.2 in · 2,595 mm | 105.1 in · 2,670 mm | — |
| Ground clearance declared | 20.5 in · 520 mm | 18.7 in · 475 mm | +9% Explorer 80 II (DT) |
| Turning radius, braked declared | 9.6 ft · 2.94 m | — | — |
| Fuel tank declared | 116.2 qt · 110.0 L | 190.2 qt · 180.0 L | +64% 655/655-4 |
SAME Explorer 80 II (DT) sources
Source
- Source: Traktorenlexikon, “SAME Explorer II 80”
- Source: Traktorenlexikon, “SAME Explorer 80”
VALMET 655/655-4 sources
Source
- Source: Traktorenlexikon, “Valmet 655”