SAME Explorer 80 II (DT) vs URSUS 912 / 914

11 material differences · fewer than 12

Tractor one

1989–1998

No measured PTO figure

Tractor two

1984–1998

No measured PTO figure

Which should you choose?

Read our verdict on the Explorer 80 II (DT) and the 912 / 914 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

SAME Explorer 80 II (DT) and URSUS 912 / 914, field by field
Field	Explorer 80 II (DT)	912 / 914	Gap
Engine
Engine power, claimed claimed	78.9 hp	78.9 hp	—
Engine declared	SAME 1000.4 A 1	T.S.-MARTIN Z-8401.1	differs
Displacement declared	4.00 L	4.56 L	+14% 912 / 914
Maximum torque declared	204 lb·ft · 276 N·m	175 lb·ft · 237 N·m	+16% Explorer 80 II (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	16.2 mph · 26 km/h	differs
Clutch declared	—	Pedal-operated, hydraulic-dry ZTS-Martin single-disc clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	10.7 gpm · 40.5 L/min	11.9 gpm · 45.0 L/min	+11% 912 / 914
Pressure declared	1,740 psi · 120 bar	—	—
Three-point lift at ends declared	—	8,611 lb · 3,906 kg	—
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,724 lb · 3,050 kg	8,874 lb · 4,025 kg	+32% 912 / 914
Wheelbase declared	95.1 in · 2,415 mm	93.9 in · 2,385 mm	—
Length declared	144.5 in · 3,670 mm	163.8 in · 4,160 mm	+13% 912 / 914
Width declared	81.1 in · 2,060 mm	77.6 in · 1,970 mm	—
Height declared	102.2 in · 2,595 mm	103.9 in · 2,640 mm	—
Ground clearance declared	20.5 in · 520 mm	13.6 in · 345 mm	+51% Explorer 80 II (DT)
Turning radius, braked declared	9.6 ft · 2.94 m	11.8 ft · 3.61 m	+23% 912 / 914
Fuel tank declared	116.2 qt · 110.0 L	95.1 qt · 90.0 L	+22% Explorer 80 II (DT)

Source

Source