SAME Explorer 60 II (DT) vs VALMET 4300

15 material differences

Tractor one

1989–1998

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the Explorer 60 II (DT) and the 4300 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 3 fields identical or within 5%, which is not counted as material

SAME Explorer 60 II (DT) and VALMET 4300, field by field
Field	Explorer 60 II (DT)	4300	Gap
Engine
Engine power, claimed claimed	59.1 hp	60.2 hp	—
Engine declared	SAME 1000.3 A	VALMET 320 D	differs
Displacement declared	3.00 L	3.30 L	+10% 4300
Maximum torque declared	151 lb·ft · 205 N·m	162 lb·ft · 220 N·m	+7% 4300
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated dry SAME single disc clutch	Dry double clutch with pedal-operated driving clutch and hand lever-operated PTO clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	7.5 gpm · 28.5 L/min	10.3 gpm · 39.0 L/min	+37% 4300
Pressure declared	1,740 psi · 120 bar	2,901 psi · 200 bar	+67% 4300
Three-point lift at ends declared	5,027 lb · 2,280 kg	6,294 lb · 2,855 kg	+25% 4300
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	5,600 lb · 2,540 kg	6,151 lb · 2,790 kg	+10% 4300
Wheelbase declared	86.4 in · 2,195 mm	83.1 in · 2,112 mm	—
Length declared	135.4 in · 3,440 mm	149.2 in · 3,790 mm	+10% 4300
Width declared	70.1 in · 1,780 mm	80.0 in · 2,032 mm	+14% 4300
Height declared	92.5 in · 2,350 mm	94.1 in · 2,390 mm	—
Ground clearance declared	17.1 in · 435 mm	18.1 in · 460 mm	+6% 4300
Turning radius, braked declared	9.1 ft · 2.78 m	12.8 ft · 3.90 m	+40% 4300
Fuel tank declared	70.8 qt · 67.0 L	100.4 qt · 95.0 L	+42% 4300

Source

Source