SAME Explorer 60 (DT) vs VALMET 365 (365-4)

14 material differences

Tractor one

1986–1990

No measured PTO figure

Tractor two

1994–1997

No measured PTO figure

Which should you choose?

Read our verdict on the Explorer 60 (DT) and the 365 (365-4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 3 fields identical or within 5%, which is not counted as material

SAME Explorer 60 (DT) and VALMET 365 (365-4), field by field
Field	Explorer 60 (DT)	365 (365-4)	Gap
Engine
Engine power, claimed claimed	59.1 hp	60.2 hp	—
Engine declared	SAME 1000.3 A	VALMET 320 D	differs
Displacement declared	3.00 L	3.30 L	+10% 365 (365-4)
Maximum torque declared	144 lb·ft · 195 N·m	162 lb·ft · 220 N·m	+13% 365 (365-4)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry SAME single-disc clutch	Dry FICHTEL & SACHS double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	—	14.5 gpm · 55.0 L/min	—
Pressure declared	3,046 psi · 210 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	5,004 lb · 2,270 kg	5,688 lb · 2,580 kg	+14% 365 (365-4)
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	5,600 lb · 2,540 kg	6,217 lb · 2,820 kg	+11% 365 (365-4)
Wheelbase declared	86.4 in · 2,195 mm	83.1 in · 2,112 mm	—
Length declared	138.6 in · 3,520 mm	146.1 in · 3,710 mm	+5% 365 (365-4)
Width declared	72.0 in · 1,828 mm	79.9 in · 2,030 mm	+11% 365 (365-4)
Height declared	95.9 in · 2,437 mm	103.5 in · 2,630 mm	+8% 365 (365-4)
Ground clearance declared	17.1 in · 435 mm	15.9 in · 405 mm	+7% Explorer 60 (DT)
Turning radius, braked declared	9.1 ft · 2.78 m	11.5 ft · 3.50 m	+26% 365 (365-4)
Fuel tank declared	70.8 qt · 67.0 L	77.1 qt · 73.0 L	+9% 365 (365-4)

Source

Source