SAME Dorado 70 (DT) vs VALMET 565/II

12 material differences

Tractor one

1995–2000

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the Dorado 70 (DT) and the 565/II → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

SAME Dorado 70 (DT) and VALMET 565/II, field by field
Field	Dorado 70 (DT)	565/II	Gap
Engine
Engine power, claimed claimed	69.1 hp	74.0 hp	+7% 565/II
Engine declared	SAME-DEUTZ-FAHR 1000.4 A 5	VALMET 320 DS	differs
Displacement declared	4.00 L	3.30 L	+21% Dorado 70 (DT)
Maximum torque declared	170 lb·ft · 231 N·m	203 lb·ft · 275 N·m	+19% 565/II
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Dry LuK double clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	10.7 gpm · 40.5 L/min	14.5 gpm · 55.0 L/min	+36% 565/II
Pressure declared	2,176 psi · 150 bar	2,901 psi · 200 bar	+33% 565/II
Three-point lift at ends declared	4,453 lb · 2,020 kg	5,688 lb · 2,580 kg	+28% 565/II
Rear PTO speeds declared	540/540E/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	5,908 lb · 2,680 kg	6,834 lb · 3,100 kg	+16% 565/II
Maximum permissible mass declared	11,023 lb · 5,000 kg	—	—
Wheelbase declared	88.0 in · 2,235 mm	88.8 in · 2,255 mm	—
Length declared	151.6 in · 3,850 mm	152.4 in · 3,870 mm	—
Width declared	75.6 in · 1,920 mm	79.9 in · 2,030 mm	+6% 565/II
Height declared	95.3 in · 2,420 mm	104.5 in · 2,655 mm	+10% 565/II
Ground clearance declared	17.5 in · 445 mm	18.1 in · 460 mm	—
Turning radius, braked declared	10.5 ft · 3.20 m	13.8 ft · 4.20 m	+31% 565/II
Fuel tank declared	95.1 qt · 90.0 L	77.1 qt · 73.0 L	+23% Dorado 70 (DT)

Source

Source