7 material differences · fewer than 12

Tractor oneSAME Atlanta-V (DT)1965–1968No measured PTO figureTractor twoURSUS 40111965–1970No measured PTO figure

Which should you choose?

Read our verdict on the Atlanta-V (DT) and the 4011 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

7 material differences · 4 fields identical or within 5%, which is not counted as material

SAME Atlanta-V (DT) and URSUS 4011, field by field
FieldAtlanta-V (DT)4011Gap
Engine
Engine power, claimed claimed41.4 hp41.4 hp—
Engine declaredSAME 954/VURSUS U-4001differs
Displacement declared3.40 L3.12 L+9% Atlanta-V (DT)
Maximum torque declared—133 lb·ft · 180 N·m—
Transmission
Top speed declared15.5 mph · 25 km/h15.5 mph · 25 km/h—
Hydraulics & hitch
Pump flow declared3.2 gpm · 12.0 L/min5.3 gpm · 20.0 L/min+67% 4011
Rear PTO speeds declared540 rpm540 rpm—
Weight & dimensions
Unladen weight declared3,483 lb · 1,580 kg4,630 lb · 2,100 kg+33% 4011
Wheelbase declared72.0 in · 1,830 mm83.7 in · 2,125 mm+16% 4011
Length declared109.4 in · 2,780 mm128.0 in · 3,250 mm+17% 4011
Width declared58.7 in · 1,490 mm70.5 in · 1,790 mm+20% 4011
Ground clearance declared16.9 in · 430 mm17.2 in · 436 mm—
Turning radius, braked declared—10.7 ft · 3.25 m—
Fuel tank declared—74.0 qt · 70.0 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

SAME Atlanta-V (DT) sources

Source
  • Source: Traktorenlexikon, “SAME Atlanta V (DT)”
  • Source: Traktorenlexikon, “SAME Atlanta 45 (DT)”

URSUS 4011 sources

Source
  • Source: Traktorenlexikon, “Ursus C-4011”