SAME Antares II 110 vs VALMET 8050

11 material differences · fewer than 12

Tractor one

1996–2000

No measured PTO figure

Tractor two

1995–2004

No measured PTO figure

Which should you choose?

Read our verdict on the Antares II 110 and the 8050 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

SAME Antares II 110 and VALMET 8050, field by field
Field	Antares II 110	8050	Gap
Engine
Engine power, claimed claimed	108.5 hp	108.5 hp	—
Engine declared	SAME 1000.6 A	VALMET 620 DSR or 620 DSRE	differs
Displacement declared	6.00 L	6.59 L	+10% 8050
Maximum torque declared	278 lb·ft · 377 N·m	340 lb·ft · 461 N·m	+22% 8050
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–31.1 mph · 30–50 km/h	differs
Clutch declared	Pedal operated dry single disc clutch	Pedal-operated dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	15.2 gpm · 57.5 L/min	18.8 gpm · 71.0 L/min	+23% 8050
Pressure declared	2,176 psi · 150 bar	—	—
Three-point lift at ends declared	10,582 lb · 4,800 kg	14,110 lb · 6,400 kg	+33% 8050
Rear PTO speeds declared	540/1000/540E/1000E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,251 lb · 4,650 kg	10,450 lb · 4,740 kg	—
Maximum permissible mass declared	16,535 lb · 7,500 kg	16,535 lb · 7,500 kg	—
Wheelbase declared	108.3 in · 2,750 mm	100.7 in · 2,558 mm	+8% Antares II 110
Length declared	180.7 in · 4,590 mm	187.3 in · 4,757 mm	—
Width declared	87.4 in · 2,220 mm	84.8 in · 2,155 mm	—
Height declared	110.4 in · 2,805 mm	108.3 in · 2,750 mm	—
Ground clearance declared	17.7 in · 450 mm	18.7 in · 475 mm	+6% 8050
Turning radius, braked declared	12.0 ft · 3.65 m	—	—
Fuel tank declared	253.6 qt · 240.0 L	174.4 qt · 165.0 L	+45% Antares II 110

Source

Source