9 material differences · fewer than 12
Tractor oneRÖHR R 281948–1949No measured PTO figureTractor twoURSUS C-3281963–1968No measured PTO figure
Which should you choose?
Read our verdict on the R 28 and the C-328 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | R 28 | C-328 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 27.6 hp | 27.6 hp | — |
| Engine declared | Güldner 2F | URSUS S-312 B | differs |
| Displacement declared | 2.60 L | 1.96 L | +32% R 28 |
| Maximum torque declared | 111 lb·ft · 150 N·m | 74 lb·ft · 100 N·m | +50% R 28 |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 14.3 mph · 23 km/h | +15% C-328 |
| Clutch declared | Pedal-operated dry single-plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 4.8 gpm · 18.0 L/min | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,748 lb · 1,700 kg | 3,646 lb · 1,654 kg | — |
| Maximum permissible mass declared | 4,189 lb · 1,900 kg | — | — |
| Wheelbase declared | 68.9 in · 1,750 mm | 72.8 in · 1,850 mm | +6% C-328 |
| Length declared | 108.3 in · 2,750 mm | 119.3 in · 3,030 mm | +10% C-328 |
| Width declared | 61.0 in · 1,550 mm | 66.1 in · 1,680 mm | +8% C-328 |
| Ground clearance declared | 11.8 in · 300 mm | 15.7 in · 400 mm | +33% C-328 |
| Turning radius, braked declared | — | 8.8 ft · 2.69 m | — |
| Fuel tank declared | 31.7 qt · 30.0 L | 37.0 qt · 35.0 L | +17% C-328 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
RÖHR R 28 sources
Source
- Source: Traktorenlexikon, “Röhr R 28”
- Source: Traktorenlexikon, “Güldner AF 30”
URSUS C-328 sources
Source
- Source: Traktorenlexikon, “Ursus C-328”
- Source: Wikipedia (pl): Ursus C-328 (open data)