8 material differences · fewer than 12
Tractor oneRenault Super 7D1965–1969No measured PTO figureTractor twoVALMET 5651964–1968No measured PTO figure
Which should you choose?
We will not advise between these two machines, because the drive differs (2WD / 4WD; 2WD). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Super 7D | 565 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 45 hp | 45.3 hp | — |
| Engine declared | — | VALMET 310 A or 310 B | — |
| Displacement declared | — | 2.69 L | — |
| Maximum torque declared | 115 lb·ft · 156 N·m | 127 lb·ft · 172 N·m | +10% 565 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 565 |
| Clutch declared | Two-stage pedal-operated dry FERODO double clutch | Pedal-operated dry Borg & Beck single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.8 gpm · 18.0 L/min | 6.4 gpm · 24.1 L/min | +34% 565 |
| Pressure declared | 2,277 psi · 157 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,505–4,101 lb · 1,590–1,860 kg | 4,259 lb · 1,932 kg | differs |
| Wheelbase declared | 72.8–73.6 in · 1,850–1,870 mm | 74.6 in · 1,895 mm | — |
| Length declared | 124.0–126.0 in · 3,150–3,200 mm | 122.4 in · 3,110 mm | — |
| Width declared | 61.8–84.3 in · 1,570–2,140 mm | 70.1–90.6 in · 1,780–2,300 mm | differs |
| Ground clearance declared | 11.4–15.4 in · 290–390 mm | 18.9 in · 480 mm | differs |
| Turning radius, braked declared | 9.5 ft · 2.90 m | 9.8 ft · 2.98 m | — |
| Fuel tank declared | 42.3 qt · 40.0 L | 40.2 qt · 38.0 L | +5% Super 7D |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Renault Super 7D sources
- Source: Traktorenlexikon, “Renault Super 7D R7055”
- Source: Traktorenlexikon, “Renault Super 7 D/R 7055”
VALMET 565 sources
- Source: Traktorenlexikon, “Valmet 565”