12 material differences
Tractor oneRenault Ceres 85 X (A)1994–1998No measured PTO figureTractor twoVALMET 45001993–1996No measured PTO figure
Which should you choose?
Read our verdict on the Ceres 85 X (A) and the 4500 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Ceres 85 X (A) | 4500 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74.0 hp | 74.0 hp | — |
| Engine declared | JOHN DEERE 4045 DRT 35 | VALMET 320 DS | differs |
| Displacement declared | 4.63 L | 3.30 L | +40% Ceres 85 X (A) |
| Maximum torque declared | 193 lb·ft · 261 N·m | 203 lb·ft · 275 N·m | +5% 4500 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Dry LuK double clutch with pedal-operated driving clutch and hand-lever-operated PTO clutch | Dry double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 10.3 gpm · 39.0 L/min | — |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Three-point lift, at the coupling points declared | 8,433 lb · 3,825 kg | 6,294 lb · 2,855 kg | +34% Ceres 85 X (A) |
| Rear PTO speeds declared | 540/1000 rpm | 540E/540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,672 lb · 3,480 kg | 6,217 lb · 2,820 kg | +23% Ceres 85 X (A) |
| Wheelbase declared | 97.2 in · 2,470 mm | 83.1 in · 2,112 mm | +17% Ceres 85 X (A) |
| Length declared | 160.9 in · 4,087 mm | 149.2 in · 3,790 mm | +8% Ceres 85 X (A) |
| Width declared | 75.9–87.8 in · 1,929–2,229 mm | 81.5 in · 2,070 mm | differs |
| Ground clearance declared | 19.3 in · 490 mm | 19.9 in · 505 mm | — |
| Turning radius, braked declared | 12.5 ft · 3.80 m | 12.8 ft · 3.90 m | — |
| Fuel tank declared | 121.5 qt · 115.0 L | 100.4 qt · 95.0 L | +21% Ceres 85 X (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Renault Ceres 85 X (A) sources
Source
- Source: Traktorenlexikon, “Renault Ceres 85X”
VALMET 4500 sources
Source
- Source: Traktorenlexikon, “Valmet 4500”
- Source: Traktorenlexikon, “Valmet 465”