13 material differences

Tractor oneRenault Ceres 85 (A)1993–1995No measured PTO figureTractor twoVALMET 565/II1992–1997No measured PTO figure

Which should you choose?

Read our verdict on the Ceres 85 (A) and the 565/II → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

13 material differences · 3 fields identical or within 5%, which is not counted as material

Renault Ceres 85 (A) and VALMET 565/II, field by field
FieldCeres 85 (A)565/IIGap
Engine
Engine power, claimed claimed74.0 hp74.0 hp—
Engine declaredMWM D 226-4VALMET 320 DSdiffers
Displacement declared4.15 L3.30 L+26% Ceres 85 (A)
Maximum torque declared185 lb·ft · 251 N·m203 lb·ft · 275 N·m+10% 565/II
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h18.6–24.9 mph · 30–40 km/h—
Clutch declaredDry LuK double clutch, pedal-operated driving clutchDry LuK double clutchdiffers
Hydraulics & hitch
Hydraulic centre declared—Open centre—
Pump flow declared12.0 gpm · 45.3 L/min14.5 gpm · 55.0 L/min+21% 565/II
Pressure declared—2,901 psi · 200 bar—
Three-point lift, at the coupling points declared8,433 lb · 3,825 kg5,688 lb · 2,580 kg+48% Ceres 85 (A)
Rear PTO speeds declared540/1000 rpm540E/540 rpmdiffers
Weight & dimensions
Unladen weight declared7,242 lb · 3,285 kg6,834 lb · 3,100 kg+6% Ceres 85 (A)
Maximum permissible mass declared13,228 lb · 6,000 kg——
Wheelbase declared95.7 in · 2,430 mm88.8 in · 2,255 mm+8% Ceres 85 (A)
Length declared154.7 in · 3,930 mm152.4 in · 3,870 mm—
Width declared73.2–92.3 in · 1,860–2,345 mm79.9 in · 2,030 mmdiffers
Ground clearance declared19.3 in · 490 mm18.1 in · 460 mm+7% Ceres 85 (A)
Turning radius, braked declared12.5 ft · 3.80 m13.8 ft · 4.20 m+11% 565/II
Fuel tank declared121.5 qt · 115.0 L77.1 qt · 73.0 L+58% Ceres 85 (A)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Renault Ceres 85 (A) sources

Source
  • Source: Traktorenlexikon, “Renault Ceres 85”
  • Source: Traktorenlexikon, “Fendt Farmer 108 S/SA”

VALMET 565/II sources

Source
  • Source: Traktorenlexikon, “Valmet 565/II”
  • Source: Traktorenlexikon, “Valmet 465”