Renault Ceres 70 X (A) vs VALMET 355 (355/4)

11 material differences · fewer than 12

Tractor one

1992–1995

No measured PTO figure

Tractor two

1990–1994

No measured PTO figure

Which should you choose?

Read our verdict on the Ceres 70 X (A) and the 355 (355/4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Renault Ceres 70 X (A) and VALMET 355 (355/4), field by field
Field	Ceres 70 X (A)	355 (355/4)	Gap
Engine
Engine power, claimed claimed	59.3 hp	60.2 hp	—
Engine declared	MWM D 226-3	VALMET TD-33 D 3 or 320 D	differs
Displacement declared	3.12 L	3.30 L	+6% 355 (355/4)
Maximum torque declared	140 lb·ft · 190 N·m	146 lb·ft · 198 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Constant flow	—	—
Pump flow declared	12.7 gpm · 48.0 L/min	8.2 gpm · 31.0 L/min	+55% Ceres 70 X (A)
Pressure declared	—	4,206 psi · 290 bar	—
Three-point lift at ends declared	6,327 lb · 2,870 kg	5,688 lb · 2,580 kg	+11% Ceres 70 X (A)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,184 lb · 2,805 kg	5,886 lb · 2,670 kg	—
Maximum permissible mass declared	11,398 lb · 5,170 kg	—	—
Wheelbase declared	93.3 in · 2,369 mm	83.1 in · 2,112 mm	+12% Ceres 70 X (A)
Length declared	150.1 in · 3,812 mm	146.1 in · 3,710 mm	—
Width declared	73.2 in · 1,860 mm	77.4 in · 1,965 mm	+6% 355 (355/4)
Height declared	99.2 in · 2,520 mm	96.9 in · 2,460 mm	—
Ground clearance declared	17.7 in · 450 mm	15.9 in · 405 mm	+11% Ceres 70 X (A)
Turning radius, braked declared	12.5 ft · 3.80 m	10.2 ft · 3.10 m	+23% Ceres 70 X (A)
Fuel tank declared	137.4 qt · 130.0 L	77.1 qt · 73.0 L	+78% Ceres 70 X (A)

Source

Source