Renault Ceres 70 (A) vs VALMET 355 (355/4)

11 material differences · fewer than 12

Tractor one

1992–1995

No measured PTO figure

Tractor two

1990–1994

No measured PTO figure

Which should you choose?

Read our verdict on the Ceres 70 (A) and the 355 (355/4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Renault Ceres 70 (A) and VALMET 355 (355/4), field by field
Field	Ceres 70 (A)	355 (355/4)	Gap
Engine
Engine power, claimed claimed	59.3 hp	60.2 hp	—
Engine declared	MWM D 226-3	VALMET TD-33 D 3 or 320 D	differs
Displacement declared	3.12 L	3.30 L	+6% 355 (355/4)
Maximum torque declared	140 lb·ft · 190 N·m	146 lb·ft · 198 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Constant flow	—	—
Pump flow declared	9.0 gpm · 34.1 L/min	8.2 gpm · 31.0 L/min	+10% Ceres 70 (A)
Pressure declared	—	4,206 psi · 290 bar	—
Three-point lift at ends declared	6,327 lb · 2,870 kg	5,688 lb · 2,580 kg	+11% Ceres 70 (A)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,184 lb · 2,805 kg	5,886 lb · 2,670 kg	—
Maximum permissible mass declared	12,125 lb · 5,500 kg	—	—
Wheelbase declared	93.3 in · 2,369 mm	83.1 in · 2,112 mm	+12% Ceres 70 (A)
Length declared	150.1 in · 3,812 mm	146.1 in · 3,710 mm	—
Width declared	73.2 in · 1,860 mm	77.4 in · 1,965 mm	+6% 355 (355/4)
Height declared	99.2 in · 2,520 mm	96.9 in · 2,460 mm	—
Ground clearance declared	17.7 in · 450 mm	15.9 in · 405 mm	+11% Ceres 70 (A)
Turning radius, braked declared	12.5 ft · 3.80 m	10.2 ft · 3.10 m	+23% Ceres 70 (A)
Fuel tank declared	137.4 qt · 130.0 L	77.1 qt · 73.0 L	+78% Ceres 70 (A)

Source

Source