Renault Ceres 65 (A) vs VALMET 255 (255-4)

8 material differences · fewer than 12

Tractor one

1993–1995

No measured PTO figure

Tractor two

1992–1994

No measured PTO figure

Which should you choose?

Read our verdict on the Ceres 65 (A) and the 255 (255-4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 8 fields identical or within 5%, which is not counted as material

Renault Ceres 65 (A) and VALMET 255 (255-4), field by field
Field	Ceres 65 (A)	255 (255-4)	Gap
Engine
Engine power, claimed claimed	53.2 hp	52 hp	—
Engine declared	MWM D 226-3	VALMET 320 D	differs
Displacement declared	3.12 L	3.30 L	+6% 255 (255-4)
Maximum torque declared	145 lb·ft · 196 N·m	148 lb·ft · 200 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch type 280/280	Pedal operated dry Fichtel & Sachs single plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Constant flow	—	—
Pump flow declared	—	10.3 gpm · 39.0 L/min	—
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	6,327 lb · 2,870 kg	5,688 lb · 2,580 kg	+11% Ceres 65 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,283 lb · 2,850 kg	6,217 lb · 2,820 kg	—
Maximum permissible mass declared	9,811 lb · 4,450 kg	—	—
Wheelbase declared	89.4 in · 2,270 mm	83.1 in · 2,112 mm	+7% Ceres 65 (A)
Length declared	142.5 in · 3,620 mm	146.1 in · 3,710 mm	—
Width declared	73.2 in · 1,860 mm	77.4 in · 1,965 mm	+6% 255 (255-4)
Height declared	93.7 in · 2,380 mm	96.9 in · 2,460 mm	—
Ground clearance declared	15.4 in · 390 mm	15.9 in · 405 mm	—
Turning radius, braked declared	12.1 ft · 3.70 m	10.2 ft · 3.10 m	+19% Ceres 65 (A)
Fuel tank declared	121.5 qt · 115.0 L	77.1 qt · 73.0 L	+58% Ceres 65 (A)

Source

Source