Renault 95-12 TX vs VALMET 802/802-4

13 material differences

Tractor one

1982–1986

No measured PTO figure

Tractor two

1980–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 95-12 TX and the 802/802-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 4 fields identical or within 5%, which is not counted as material

Renault 95-12 TX and VALMET 802/802-4, field by field
Field	95-12 TX	802/802-4	Gap
Engine
Engine power, claimed claimed	82.9 hp	80.9 hp	—
Engine declared	MWM D 226-4	VALMET 411 CS	differs
Displacement declared	4.15 L	4.40 L	+6% 802/802-4
Maximum torque declared	193 lb·ft · 262 N·m	226 lb·ft · 306 N·m	+17% 802/802-4
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry LuK double clutch	Dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Pump flow declared	11.3 gpm · 42.6 L/min	11.4 gpm · 43.0 L/min	—
Pressure declared	1,595 psi · 110 bar	—	—
Three-point lift at ends declared	9,039 lb · 4,100 kg	6,393 lb · 2,900 kg	+41% 95-12 TX
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	8,818 lb · 4,000 kg	7,802 lb · 3,539 kg	+13% 95-12 TX
Wheelbase declared	99.1 in · 2,518 mm	92.1 in · 2,339 mm	+8% 95-12 TX
Length declared	160.6 in · 4,080 mm	151.2 in · 3,840 mm	+6% 95-12 TX
Width declared	80.1 in · 2,035 mm	77.6 in · 1,971 mm	—
Height declared	109.2 in · 2,773 mm	98.4 in · 2,499 mm	+11% 95-12 TX
Ground clearance declared	21.2 in · 538 mm	18.9 in · 480 mm	+12% 95-12 TX
Turning radius, braked declared	12.3 ft · 3.75 m	11.8 ft · 3.61 m	—
Fuel tank declared	77.1 qt · 73.0 L	95.1 qt · 90.0 L	+23% 802/802-4

Source

Source