Renault 80-12 SP vs VALMET 802/802-4

11 material differences · fewer than 12

Tractor one

1986–1989

No measured PTO figure

Tractor two

1980–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 80-12 SP and the 802/802-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Renault 80-12 SP and VALMET 802/802-4, field by field
Field	80-12 SP	802/802-4	Gap
Engine
Engine power, claimed claimed	74.0 hp	80.9 hp	+9% 802/802-4
Engine declared	PERKINS 4.248	VALMET 411 CS	differs
Displacement declared	4.07 L	4.40 L	+8% 802/802-4
Maximum torque declared	200 lb·ft · 271 N·m	226 lb·ft · 306 N·m	+13% 802/802-4
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Dry LuK double clutch	Dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Pump flow declared	8.4 gpm · 31.9 L/min	11.4 gpm · 43.0 L/min	+35% 802/802-4
Three-point lift at ends declared	10,075 lb · 4,570 kg	6,393 lb · 2,900 kg	+58% 80-12 SP
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,327 lb · 2,870 kg	7,802 lb · 3,539 kg	+23% 802/802-4
Wheelbase declared	93.3 in · 2,370 mm	92.1 in · 2,339 mm	—
Length declared	152.4 in · 3,870 mm	151.2 in · 3,840 mm	—
Width declared	75.9 in · 1,929 mm	77.6 in · 1,971 mm	—
Height declared	97.8 in · 2,485 mm	98.4 in · 2,499 mm	—
Ground clearance declared	16.5 in · 420 mm	18.9 in · 480 mm	+14% 802/802-4
Turning radius, braked declared	13.3 ft · 4.05 m	11.8 ft · 3.61 m	+12% 80-12 SP
Fuel tank declared	86.6 qt · 82.0 L	95.1 qt · 90.0 L	+10% 802/802-4

Source

Source