Renault 75-32 MX vs VALMET 700

10 material differences · fewer than 12

Tractor one

1989–1993

No measured PTO figure

Tractor two

1997–2002

No measured PTO figure

Which should you choose?

Read our verdict on the 75-32 MX and the 700 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Renault 75-32 MX and VALMET 700, field by field
Field	75-32 MX	700	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	MWM D 226-4	VALMET 320 DS or DSRE	differs
Displacement declared	4.15 L	3.30 L	+26% 75-32 MX
Maximum torque declared	177 lb·ft · 240 N·m	214 lb·ft · 290 N·m	+21% 700
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	Dry LuK double clutch	—
Hydraulics & hitch
Pump flow declared	11.5 gpm · 43.4 L/min	14.7 gpm · 55.7 L/min	+28% 700
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	10,075 lb · 4,570 kg	6,294 lb · 2,855 kg	+60% 75-32 MX
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	7,055 lb · 3,200 kg	7,077 lb · 3,210 kg	—
Maximum permissible mass declared	12,390 lb · 5,620 kg	—	—
Wheelbase declared	95.7 in · 2,430 mm	83.1 in · 2,112 mm	+15% 75-32 MX
Length declared	154.7 in · 3,930 mm	147.4 in · 3,745 mm	—
Width declared	80.3 in · 2,040 mm	84.2 in · 2,139 mm	—
Height declared	97.6 in · 2,480 mm	104.7 in · 2,660 mm	+7% 700
Ground clearance declared	19.3 in · 490 mm	19.9 in · 505 mm	—
Turning radius, braked declared	13.3 ft · 4.05 m	11.5 ft · 3.50 m	+16% 75-32 MX
Fuel tank declared	121.5 qt · 115.0 L	83.5 qt · 79.0 L	+46% 75-32 MX

Source

Source