Renault 145-54 TX vs VALMET 1502

11 material differences · fewer than 12

Tractor one

1989–1990

No measured PTO figure

Tractor two

1975–1980

No measured PTO figure

Which should you choose?

Read our verdict on the 145-54 TX and the 1502 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Renault 145-54 TX and VALMET 1502, field by field
Field	145-54 TX	1502	Gap
Engine
Engine power, claimed claimed	133.3 hp	134 hp	—
Engine declared	MWM TD 228-6	VALMET 611 CS	differs
Displacement declared	6.23 L	6.60 L	+6% 1502
Maximum torque declared	339 lb·ft · 459 N·m	406 lb·ft · 550 N·m	+20% 1502
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry LuK dual clutch with pedal-operated drive clutch and hand-operated PTO clutch	Dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Pump flow declared	10.9 gpm · 41.1 L/min	—	—
Three-point lift at ends declared	19,511 lb · 8,850 kg	7,871 lb · 3,570 kg	+148% 145-54 TX
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,467 lb · 5,655 kg	16,469 lb · 7,470 kg	+32% 1502
Maximum permissible mass declared	18,739 lb · 8,500 kg	—	—
Wheelbase declared	107.9 in · 2,740 mm	101.3 in · 2,572 mm	+7% 145-54 TX
Length declared	181.2 in · 4,603 mm	209.8 in · 5,330 mm	+16% 1502
Width declared	83.3 in · 2,116 mm	83.7 in · 2,125 mm	—
Height declared	117.4 in · 2,983 mm	118.1 in · 3,000 mm	—
Ground clearance declared	19.0 in · 482 mm	16.5 in · 420 mm	+15% 145-54 TX
Turning radius, braked declared	16.4 ft · 5.00 m	—	—
Fuel tank declared	158.5 qt · 150.0 L	190.2 qt · 180.0 L	+20% 1502

Source

Source