10 material differences · fewer than 12
Tractor oneNuffield 10/601964–1967No measured PTO figureTractor twoURSUS C-3501965–1970No measured PTO figure
Which should you choose?
Read our verdict on the 10/60 and the C-350 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 10/60 | C-350 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.5 hp | 44.4 hp | +30% 10/60 |
| Engine declared | BMC 38 T | URSUS/ZM S-4001 | differs |
| Displacement declared | 3.77 L | 3.12 L | +21% 10/60 |
| Maximum torque declared | 170 lb·ft · 230 N·m | 133 lb·ft · 180 N·m | +28% 10/60 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal-operated dry Borg & Beck single-plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 9.2 gpm · 35.0 L/min | 5.3 gpm · 20.0 L/min | +75% 10/60 |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,864 lb · 2,660 kg | 4,731 lb · 2,146 kg | +24% 10/60 |
| Wheelbase declared | 78.0 in · 1,981 mm | 83.7 in · 2,125 mm | +7% C-350 |
| Length declared | 121.5 in · 3,086 mm | 128.0 in · 3,250 mm | +5% C-350 |
| Width declared | 69.0 in · 1,753 mm | 70.9 in · 1,800 mm | — |
| Ground clearance declared | 12.6 in · 320 mm | 17.2 in · 436 mm | +36% C-350 |
| Turning radius, braked declared | 10.4 ft · 3.18 m | 11.5 ft · 3.49 m | +10% C-350 |
| Fuel tank declared | 67.2 qt · 63.6 L | 74.0 qt · 70.0 L | +10% C-350 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Nuffield 10/60 sources
- Source: Traktorenlexikon, “Nuffield 10/60 (1964-1967)”
URSUS C-350 sources
- Source: Traktorenlexikon, “Ursus C-350”