New Holland TL 80 (A) vs VALMET 800

12 material differences

Tractor one

1998–2004

No measured PTO figure

Tractor two

1997–2002

No measured PTO figure

Which should you choose?

Read our verdict on the TL 80 (A) and the 800 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

New Holland TL 80 (A) and VALMET 800, field by field
Field	TL 80 (A)	800	Gap
Engine
Engine power, claimed claimed	74.0 hp	79 hp	+7% 800
Engine declared	Iveco 8045.05 R	VALMET 420 DS or DSRE	differs
Displacement declared	3.91 L	4.40 L	+13% 800
Maximum torque declared	188 lb·ft · 255 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Dry LuK double clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	15.9 gpm · 60.0 L/min	14.7 gpm · 55.7 L/min	+8% TL 80 (A)
Pressure declared	2,103 psi · 145 bar	2,901 psi · 200 bar	+38% 800
Three-point lift at ends declared	7,385 lb · 3,350 kg	7,419 lb · 3,365 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	9,149 lb · 4,150 kg	7,341 lb · 3,330 kg	+25% TL 80 (A)
Maximum permissible mass declared	11,464 lb · 5,200 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	88.3 in · 2,244 mm	—
Length declared	168.5 in · 4,280 mm	152.6 in · 3,877 mm	+10% TL 80 (A)
Width declared	78.9 in · 2,005 mm	85.7 in · 2,177 mm	+9% 800
Height declared	97.4 in · 2,475 mm	106.3 in · 2,700 mm	+9% 800
Ground clearance declared	15.0 in · 380 mm	19.9 in · 505 mm	+33% 800
Turning radius, braked declared	11.3 ft · 3.45 m	15.7 ft · 4.80 m	+39% 800
Fuel tank declared	121.5 qt · 115.0 L	83.5 qt · 79.0 L	+46% TL 80 (A)

Source

Source