New Holland TL 80 (A) vs VALMET 6100-4

13 material differences

Tractor one

1998–2004

No measured PTO figure

Tractor two

1991–1994

No measured PTO figure

Which should you choose?

Read our verdict on the TL 80 (A) and the 6100-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 5 fields identical or within 5%, which is not counted as material

New Holland TL 80 (A) and VALMET 6100-4, field by field
Field	TL 80 (A)	6100-4	Gap
Engine
Engine power, claimed claimed	74.0 hp	77.9 hp	—
Engine declared	Iveco 8045.05 R	VALMET 320 DS	differs
Displacement declared	3.91 L	3.30 L	+18% TL 80 (A)
Maximum torque declared	188 lb·ft · 255 N·m	229 lb·ft · 310 N·m	+22% 6100-4
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated, dry Fichtel & Sachs single-plate clutch	—
Hydraulics & hitch
Pump flow declared	15.9 gpm · 60.0 L/min	21.2 gpm · 80.3 L/min	+34% 6100-4
Pressure declared	2,103 psi · 145 bar	2,031–2,248 psi · 140–155 bar	differs
Three-point lift at ends declared	7,385 lb · 3,350 kg	9,601 lb · 4,355 kg	+30% 6100-4
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,149 lb · 4,150 kg	8,818 lb · 4,000 kg	—
Maximum permissible mass declared	11,464 lb · 5,200 kg	13,889 lb · 6,300 kg	+21% 6100-4
Wheelbase declared	92.2 in · 2,342 mm	90.6 in · 2,302 mm	—
Length declared	168.5 in · 4,280 mm	169.1 in · 4,295 mm	—
Width declared	78.9 in · 2,005 mm	85.2 in · 2,165 mm	+8% 6100-4
Height declared	97.4 in · 2,475 mm	106.1 in · 2,695 mm	+9% 6100-4
Ground clearance declared	15.0 in · 380 mm	16.1 in · 410 mm	+8% 6100-4
Turning radius, braked declared	11.3 ft · 3.45 m	13.1 ft · 4.00 m	+16% 6100-4
Fuel tank declared	121.5 qt · 115.0 L	167.0 qt · 158.0 L	+37% 6100-4

Source

Source