1 material differences · fewer than 12
Tractor oneNew Holland T 90202007–2010No measured PTO figureTractor twoNew Holland TJ-3302001–2002No measured PTO figure
Which should you choose?
Read our verdict on the T 9020 and the TJ-330 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
1 material differences · 10 fields identical or within 5%, which is not counted as material
| Field | T 9020 | TJ-330 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 330.4 hp | 325.5 hp | — |
| Engine declared | — | CUMMINS 6 TAA-9004 | — |
| Displacement declared | — | 8.85 L | — |
| Maximum torque declared | 1,077 lb·ft · 1,460 N·m | 1,077 lb·ft · 1,460 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Electrohydraulically-actuated, wet multi-disc clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 40.6 gpm · 153.7 L/min | 40.6 gpm · 153.7 L/min | — |
| Pressure declared | 3,336 psi · 230 bar | 3,263 psi · 225 bar | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 32,296 lb · 14,649 kg | 32,296 lb · 14,649 kg | — |
| Maximum permissible mass declared | 39,602 lb · 17,963 kg | — | — |
| Wheelbase declared | 154.0 in · 3,911 mm | 154.0 in · 3,911 mm | — |
| Length declared | 297.6 in · 7,558 mm | 297.6 in · 7,558 mm | — |
| Width declared | 120.1 in · 3,050 mm | 145.0 in · 3,683 mm | +21% TJ-330 |
| Turning radius, braked declared | — | 15.1 ft · 4.60 m | — |
| Fuel tank declared | 799.9 qt · 757.0 L | 799.9 qt · 757.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
New Holland T 9020 sources
- Source: Traktorenlexikon, “New Holland T9020”
New Holland TJ-330 sources
- Source: Traktorenlexikon, “New Holland TJ330”