New Holland T 5040 vs VALMET 6250 HiTech

12 material differences

Tractor one

2008–2012

No measured PTO figure

Tractor two

2000–2006

No measured PTO figure

Which should you choose?

Read our verdict on the T 5040 and the 6250 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

New Holland T 5040 and VALMET 6250 HiTech, field by field
Field	T 5040	6250 HiTech	Gap
Engine
Engine power, claimed claimed	84.9 hp	—	—
Engine declared	IVECO-NEF F4CE 9484 N	VALMET 420 DSRE or 44 DT	differs
Displacement declared	4.49 L	4.40 L	—
Maximum torque declared	254 lb·ft · 345 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Electrohydraulically actuated wet multi-disc clutch	Electrically operated dry Fichtel & Sachs single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	17.4 gpm · 66.0 L/min	19.4 gpm · 73.5 L/min	+11% 6250 HiTech
Pressure declared	3,336 psi · 230 bar	2,901 psi · 200 bar	+15% T 5040
Three-point lift at ends declared	10,582 lb · 4,800 kg	12,588 lb · 5,710 kg	+19% 6250 HiTech
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,389 lb · 3,805 kg	9,698 lb · 4,399 kg	+16% 6250 HiTech
Maximum permissible mass declared	13,669 lb · 6,200 kg	19,842 lb · 9,000 kg	+45% 6250 HiTech
Wheelbase declared	92.2 in · 2,342 mm	91.6 in · 2,326 mm	—
Length declared	158.7 in · 4,030 mm	176.2 in · 4,475 mm	+11% 6250 HiTech
Width declared	78.9 in · 2,005 mm	85.8 in · 2,179 mm	+9% 6250 HiTech
Height declared	100.2 in · 2,546 mm	109.1 in · 2,771 mm	+9% 6250 HiTech
Ground clearance declared	—	17.1 in · 434 mm	—
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	134.2 qt · 127.0 L	174.4 qt · 165.0 L	+30% 6250 HiTech

Source

Source