New Holland T 5030 vs VALMET 865-2/865

11 material differences · fewer than 12

Tractor one

2008–2012

No measured PTO figure

Tractor two

1996–1997

No measured PTO figure

Which should you choose?

Read our verdict on the T 5030 and the 865-2/865 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

New Holland T 5030 and VALMET 865-2/865, field by field
Field	T 5030	865-2/865	Gap
Engine
Engine power, claimed claimed	75.0 hp	86 hp	+14% 865-2/865
Engine declared	IVECO-NEF F4CE 9484 A	VALMET 420 DSR	differs
Displacement declared	4.49 L	3.30 L	+36% T 5030
Maximum torque declared	215 lb·ft · 291 N·m	229 lb·ft · 310 N·m	+7% 865-2/865
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Electrohydraulically operated wet multi-plate clutch	Dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	16.5 gpm · 62.5 L/min	15.1 gpm · 57.0 L/min	+10% T 5030
Pressure declared	3,336 psi · 230 bar	2,901 psi · 200 bar	+15% T 5030
Three-point lift at ends declared	10,582 lb · 4,800 kg	7,419 lb · 3,365 kg	+43% T 5030
Rear PTO speeds declared	540/540E/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	8,267 lb · 3,750 kg	7,033 lb · 3,190 kg	+18% T 5030
Maximum permissible mass declared	13,669 lb · 6,200 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	88.3 in · 2,244 mm	—
Length declared	158.7 in · 4,030 mm	151.3 in · 3,842 mm	—
Width declared	78.9 in · 2,005 mm	80.3 in · 2,040 mm	—
Height declared	100.2 in · 2,546 mm	102.8 in · 2,610 mm	—
Ground clearance declared	17.2 in · 438 mm	18.3 in · 465 mm	+6% 865-2/865
Turning radius, braked declared	—	11.8 ft · 3.60 m	—
Fuel tank declared	134.2 qt · 127.0 L	77.1 qt · 73.0 L	+74% T 5030

Source

Source