10 material differences · fewer than 12
Tractor oneNew Holland T 50302008–2012No measured PTO figureTractor twoNew Holland TN 75 DA/SA2003–2008No measured PTO figure
Which should you choose?
Read our verdict on the T 5030 and the TN 75 DA/SA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | T 5030 | TN 75 DA/SA | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 75.0 hp | 75.0 hp | — |
| Engine declared | IVECO-NEF F4CE 9484 A | IVECO 8035.25 | differs |
| Displacement declared | 4.49 L | 2.93 L | +53% T 5030 |
| Maximum torque declared | 215 lb·ft · 291 N·m | 203 lb·ft · 275 N·m | +6% T 5030 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Electrohydraulically operated wet multi-plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 16.5 gpm · 62.5 L/min | 15.6 gpm · 58.9 L/min | +6% T 5030 |
| Pressure declared | 3,336 psi · 230 bar | 3,263 psi · 225 bar | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540/540E/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,267 lb · 3,750 kg | 5,214 lb · 2,365 kg | +59% T 5030 |
| Maximum permissible mass declared | 13,669 lb · 6,200 kg | — | — |
| Wheelbase declared | 92.2 in · 2,342 mm | 81.5 in · 2,070 mm | +13% T 5030 |
| Length declared | 158.7 in · 4,030 mm | 141.8 in · 3,601 mm | +12% T 5030 |
| Width declared | 78.9 in · 2,005 mm | 73.5–95.6 in · 1,867–2,428 mm | differs |
| Ground clearance declared | 17.2 in · 438 mm | 13.9 in · 353 mm | +24% T 5030 |
| Fuel tank declared | 134.2 qt · 127.0 L | 56.0 qt · 53.0 L | +140% T 5030 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
New Holland T 5030 sources
- Source: Traktorenlexikon, “New Holland T5030”
New Holland TN 75 DA/SA sources
- Source: Traktorenlexikon, “New Holland TN75 DA/SA”
- Source: Traktorenlexikon, “Steyr 375 Kompakt”