10 material differences · fewer than 12

Tractor oneNew Holland 9682 (Traktorenlexikon)1995–1999No measured PTO figureTractor twoNew Holland TJ-3752001–2005No measured PTO figure

Which should you choose?

Read our verdict on the 9682 and the TJ-375 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

10 material differences · 5 fields identical or within 5%, which is not counted as material

New Holland 9682 (Traktorenlexikon) and New Holland TJ-375, field by field
Field9682TJ-375Gap
Engine
Engine power, claimed claimed355.1 hp369.9 hp—
Engine declaredCUMMINS N 14-360CUMMINS QSX-15differs
Displacement declared14.04 L14.95 L+6% TJ-375
Maximum torque declared1,159 lb·ft · 1,572 N·m1,325 lb·ft · 1,797 N·m+14% TJ-375
Transmission
Top speed declared18.6 mph · 30 km/h21.7 mph · 35 km/h+17% TJ-375
Clutch declaredPedal-operated, hydraulic-wet clutchPedal operated electrohydraulic wet Fuji-Univance multi-disc clutchdiffers
Hydraulics & hitch
Pump flow declared47.2 gpm · 178.8 L/min40.9 gpm · 154.8 L/min+16% 9682
Pressure declared—2,596–2,698 psi · 179–186 bar—
Three-point lift, at the coupling points declared20,216 lb · 9,170 kg19,632 lb · 8,905 kg—
Rear PTO speeds declared1000 rpm1000 rpm—
Weight & dimensions
Unladen weight declared32,029 lb · 14,528 kg37,620 lb · 17,064 kg+17% TJ-375
Maximum permissible mass declared37,999 lb · 17,236 kg39,683 lb · 18,000 kg—
Wheelbase declared133.1 in · 3,380 mm154.0 in · 3,911 mm+16% TJ-375
Length declared266.0 in · 6,756 mm297.6 in · 7,558 mm+12% TJ-375
Width declared150.4 in · 3,820 mm145.0 in · 3,683 mm—
Ground clearance declared—13.1 in · 334 mm—
Turning radius, braked declared14.4 ft · 4.40 m——
Fuel tank declared920.0 qt · 870.6 L1,200.4 qt · 1,136.0 L+30% TJ-375

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

New Holland 9682 (Traktorenlexikon) sources

Source
  • Source: Traktorenlexikon, “New Holland 9682”

New Holland TJ-375 sources

Source
  • Source: Traktorenlexikon, “New Holland TJ375”