10 material differences · fewer than 12
Tractor oneNew Holland 82601996–1999No measured PTO figureTractor twoNew Holland TM 125 (Traktorenlexikon)1999–2002No measured PTO figure
Which should you choose?
Read our verdict on the 8260 and the TM 125 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 8260 | TM 125 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 113.5 hp | 113.5 hp | — |
| Engine declared | NEW HOLLAND 675-TD | NEW HOLLAND 675-T/WS | differs |
| Displacement declared | 7.48 L | 7.48 L | — |
| Maximum torque declared | 330 lb·ft · 447 N·m | 372 lb·ft · 504 N·m | +13% TM 125 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Electro-hydraulically operated, oil-immersed multi-plate driving clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 24.6 gpm · 93.3 L/min | 30.9 gpm · 116.9 L/min | +25% TM 125 |
| Pressure declared | 2,799 psi · 193 bar | 2,466 psi · 170 bar | +14% 8260 |
| Three-point lift, at the coupling points declared | 12,655 lb · 5,740 kg | 14,462 lb · 6,560 kg | +14% TM 125 |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,662 lb · 5,290 kg | 11,766 lb · 5,337 kg | — |
| Maximum permissible mass declared | 17,637 lb · 8,000 kg | 18,739 lb · 8,500 kg | +6% TM 125 |
| Wheelbase declared | 107.2 in · 2,723 mm | 107.2 in · 2,723 mm | — |
| Length declared | 179.5 in · 4,560 mm | 184.1 in · 4,675 mm | — |
| Width declared | 92.5 in · 2,350 mm | 84.6–108.3 in · 2,150–2,752 mm | differs |
| Ground clearance declared | 14.2 in · 360 mm | 14.4 in · 365 mm | — |
| Turning radius, braked declared | — | 14.8 ft · 4.52 m | — |
| Fuel tank declared | 232.5 qt · 220.0 L | 343.4 qt · 325.0 L | +48% TM 125 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
New Holland 8260 sources
- Source: Traktorenlexikon, “New Holland 8260”
New Holland TM 125 (Traktorenlexikon) sources
- Source: Traktorenlexikon, “New Holland TM125”