New Holland 5635 (A) vs VALMET 4600

14 material differences

Tractor one

1996–1998

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 5635 (A) and the 4600 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 2 fields identical or within 5%, which is not counted as material

New Holland 5635 (A) and VALMET 4600, field by field
Field	5635 (A)	4600	Gap
Engine
Engine power, claimed claimed	74.0 hp	78.9 hp	+7% 4600
Engine declared	Iveco 8045.05 R	VALMET 420 D	differs
Displacement declared	3.91 L	4.40 L	+13% 4600
Maximum torque declared	162 lb·ft · 220 N·m	214 lb·ft · 290 N·m	+32% 4600
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Dry double clutch	—
Hydraulics & hitch
Pump flow declared	11.8 gpm · 44.5 L/min	10.3 gpm · 39.0 L/min	+14% 5635 (A)
Pressure declared	2,466 psi · 170 bar	2,901 psi · 200 bar	+18% 4600
Three-point lift at ends declared	9,259 lb · 4,200 kg	6,294 lb · 2,855 kg	+47% 5635 (A)
Rear PTO speeds declared	540/540E/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	9,237 lb · 4,190 kg	6,945 lb · 3,150 kg	+33% 5635 (A)
Maximum permissible mass declared	11,905 lb · 5,400 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	94.0 in · 2,387 mm	—
Length declared	157.5 in · 4,000 mm	149.2 in · 3,790 mm	+6% 5635 (A)
Width declared	79.5 in · 2,020 mm	81.5 in · 2,070 mm	—
Height declared	100.4 in · 2,550 mm	95.1 in · 2,415 mm	+6% 5635 (A)
Ground clearance declared	18.9 in · 480 mm	17.1 in · 435 mm	+10% 5635 (A)
Turning radius, braked declared	11.5 ft · 3.50 m	14.8 ft · 4.50 m	+29% 4600
Fuel tank declared	121.5 qt · 115.0 L	100.4 qt · 95.0 L	+21% 5635 (A)

Source

Source