New Holland 4835 vs VALMET 4400

12 material differences

Tractor one

1996–1998

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 4835 and the 4400 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

New Holland 4835 and VALMET 4400, field by field
Field	4835	4400	Gap
Engine
Engine power, claimed claimed	64 hp	66.1 hp	—
Engine declared	Iveco 8045.06 R	VALMET 320 DS	differs
Displacement declared	3.61 L	3.30 L	+10% 4835
Maximum torque declared	146 lb·ft · 198 N·m	177 lb·ft · 240 N·m	+21% 4400
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Single-disc dry clutch	Dry double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	Constant flow	—	—
Pump flow declared	12.2 gpm · 46.0 L/min	10.3 gpm · 39.0 L/min	+18% 4835
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	—	6,294 lb · 2,855 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	7,209 lb · 3,270 kg	6,151 lb · 2,790 kg	+17% 4835
Wheelbase declared	92.1 in · 2,340 mm	83.1 in · 2,112 mm	+11% 4835
Length declared	156.7 in · 3,980 mm	149.2 in · 3,790 mm	—
Width declared	72.4 in · 1,840 mm	80.0 in · 2,032 mm	+10% 4400
Height declared	97.6 in · 2,480 mm	94.1 in · 2,390 mm	—
Ground clearance declared	13.8 in · 350 mm	19.9 in · 505 mm	+44% 4400
Turning radius, braked declared	—	12.8 ft · 3.90 m	—
Fuel tank declared	116.2 qt · 110 L	100.4 qt · 95.0 L	+16% 4835

Source

Source