Massey Ferguson MF 590 (A) or SOMECA 780 (TD)?

Which should you choose?

The figures split: the Massey Ferguson MF 590 (A) is ahead on hydraulic flow; the SOMECA 780 (TD) is ahead on three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 590 (A) and SOMECA 780 (TD), with the call on each
QuestionMF 590 (A)780 (TD)Call
Which puts more power through the PTO shaft?47.4 kW (63.6 hp)Traktorenlexikon, “Massey Ferguson MF 590 & 590A”47.7 kW (64.0 hp)Traktorenlexikon, “Someca 780”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 590 (A) and the 780 (TD).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the MF 590 (A) and the 780 (TD).
Which pumps more oil for implements?62.5 L/min (16.5 gpm)Traktorenlexikon, “Massey Ferguson MF 590 & 590A”26.3 L/min (6.9 gpm)Traktorenlexikon, “Someca 780”AheadThe Massey Ferguson MF 590 (A) has 138% more hydraulic flow (36.2 L/min / 9.6 gpm) than the SOMECA 780 (TD) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,900 kg (6,393 lb)Traktorenlexikon, “Massey Ferguson MF 590 & 590A”3,350 kg (7,385 lb)Traktorenlexikon, “Someca 780”AheadThe SOMECA 780 (TD) has 16% more lift (450 kg / 992 lb) than the Massey Ferguson MF 590 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,290 kg (7,253 lb)Traktorenlexikon, “Massey Ferguson MF 590 & 590A”2,410 kg (5,313 lb)Traktorenlexikon, “Someca 780”Ahead (a fact, not an advantage)The Massey Ferguson MF 590 (A) is 37% heavier (880 kg / 1,940 lb) than the SOMECA 780 (TD) (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the MF 590 (A) and the 780 (TD).
Which has the wider choice of gears?8 to 12Traktorenlexikon, “Massey Ferguson MF 590 & 590A”8 to 12Traktorenlexikon, “Someca 780”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the MF 590 (A) and the 780 (TD).
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 590 & 590A”25 km/h (15.5 mph)Traktorenlexikon, “Someca 780”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 590 & 590A”540/1000 rpmTraktorenlexikon, “Someca 780”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 590 & 590A”independentTraktorenlexikon, “Someca 780”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 590 & 590A”Two-wheel or four-wheel driveTraktorenlexikon, “Someca 780”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1976–19821975–1983EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson MF 590 (A) has 138% more hydraulic flow (36.2 L/min / 9.6 gpm) than the SOMECA 780 (TD) (both pump flow, as stated by the source).
  • The SOMECA 780 (TD) has 16% more lift (450 kg / 992 lb) than the Massey Ferguson MF 590 (A) (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson MF 590 (A) is 37% heavier (880 kg / 1,940 lb) than the SOMECA 780 (TD) (both unladen weight, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources