10 material differences · fewer than 12
Tractor oneMassey Ferguson MF 590 (A)1976–1982No measured PTO figureTractor twoSOMECA 780 (TD)1975–1983No measured PTO figure
Which should you choose?
Read our verdict on the MF 590 (A) and the 780 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | MF 590 (A) | 780 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74.0 hp | 77.0 hp | — |
| Engine declared | Perkins A 4.248 S | FIAT-IVECO 8045.04.277 (377) | differs |
| Displacement declared | 4.06 L | 3.67 L | +11% MF 590 (A) |
| Maximum torque declared | 211 lb·ft · 285.5 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | — | dry FERODO or LuK double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 16.5 gpm · 62.5 L/min | 6.9 gpm · 26.3 L/min | +138% MF 590 (A) |
| Three-point lift, at the coupling points declared | 6,393 lb · 2,900 kg | 7,385 lb · 3,350 kg | +16% 780 (TD) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,253 lb · 3,290 kg | 5,313 lb · 2,410 kg | +37% MF 590 (A) |
| Wheelbase declared | 90.0 in · 2,286 mm | 89.2 in · 2,265 mm | — |
| Length declared | 153.0 in · 3,886 mm | 150.5 in · 3,823 mm | — |
| Width declared | 76.8 in · 1,950 mm | 75.1–99.5 in · 1,908–2,528 mm | differs |
| Ground clearance declared | 18.5 in · 470 mm | 17.2 in · 437 mm | +8% MF 590 (A) |
| Turning radius, braked declared | 12.5 ft · 3.81 m | 11.4 ft · 3.46 m | +10% MF 590 (A) |
| Fuel tank declared | 103.8 qt · 98.2 L | 84.5 qt · 80.0 L | +23% MF 590 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 590 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 590 & 590A”
- Source: Traktorenlexikon, “Massey Ferguson MF 290”
SOMECA 780 (TD) sources
- Source: Traktorenlexikon, “Someca 780”
- Source: Traktorenlexikon, “Fiat 780/780 DT”