Massey Ferguson MF 4225 (A) vs Renault Ceres 75 (A)

8 material differences · fewer than 12

Tractor one

1997–2001

No measured PTO figure

Tractor two

1993–1995

No measured PTO figure

Which should you choose?

Read our verdict on the MF 4225 (A) and the Ceres 75 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 4225 (A) and Renault Ceres 75 (A), field by field
Field	MF 4225 (A)	Ceres 75 (A)	Gap
Engine
Engine power, claimed claimed	64.1 hp	64.1 hp	—
Engine declared	Perkins 4.41	Perkins LD 80442	differs
Displacement declared	4.08 L	3.86 L	+6% MF 4225 (A)
Maximum torque declared	—	176 lb·ft · 239 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal operated dry and air cooled single plate clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Constant flow	—
Pump flow declared	—	9.0 gpm · 34.1 L/min	—
Three-point lift at ends declared	5,401 lb · 2,450 kg	6,327 lb · 2,870 kg	+17% Ceres 75 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,694 lb · 3,490 kg	6,548 lb · 2,970 kg	+18% MF 4225 (A)
Maximum permissible mass declared	14,330 lb · 6,500 kg	12,125 lb · 5,500 kg	+18% MF 4225 (A)
Wheelbase declared	92.5 in · 2,350 mm	93.3 in · 2,369 mm	—
Length declared	151.6 in · 3,850 mm	155.2 in · 3,941 mm	—
Width declared	78.3 in · 1,990 mm	73.2 in · 1,860 mm	+7% MF 4225 (A)
Height declared	97.2 in · 2,468 mm	99.2 in · 2,520 mm	—
Ground clearance declared	10.6 in · 270 mm	17.7 in · 450 mm	+67% Ceres 75 (A)
Turning radius, braked declared	—	12.5 ft · 3.80 m	—
Fuel tank declared	88.8 qt · 84.0 L	121.5 qt · 115.0 L	+37% Ceres 75 (A)

Source

Source