9 material differences · fewer than 12
Tractor oneMassey Ferguson MF 421962–1965No measured PTO figureTractor twoSOMECA 415 (DT)1965–1968No measured PTO figure
Which should you choose?
We will not advise between these two machines, because the drive differs (2WD; Two-wheel or four-wheel drive). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | MF 42 | 415 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 44.4 hp | — |
| Engine declared | Perkins A 3.152 | O.M.-FIAT 615.000 | differs |
| Displacement declared | 2.50 L | 2.27 L | +10% MF 42 |
| Maximum torque declared | — | 101 lb·ft · 137 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal operated dry Laycock single disc clutch | Pedal operated dry double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.2 gpm · 15.9 L/min | 4.8 gpm · 18.0 L/min | +13% 415 (DT) |
| Pressure declared | 2,304 psi · 159 bar | 2,843 psi · 196 bar | +23% 415 (DT) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,638 lb · 1,650 kg | 3,505 lb · 1,590 kg | — |
| Wheelbase declared | 72.0 in · 1,830 mm | 75.8 in · 1,925 mm | — |
| Length declared | 116.9 in · 2,970 mm | 119.7 in · 3,040 mm | — |
| Width declared | 72.0 in · 1,830 mm | 64.0–90.6 in · 1,625–2,300 mm | differs |
| Ground clearance declared | 13.4 in · 340 mm | 18.9 in · 480 mm | +41% 415 (DT) |
| Turning radius, braked declared | 9.0 ft · 2.75 m | 10.4 ft · 3.18 m | +16% 415 (DT) |
| Fuel tank declared | 40.7 qt · 38.5 L | 51.8 qt · 49.0 L | +27% 415 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 42 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 42”
- Source: Traktorenlexikon, “Massey Ferguson MF 233”
- Source: Traktorenlexikon, “Massey Ferguson MF 42 S”
SOMECA 415 (DT) sources
- Source: Traktorenlexikon, “Someca 415”
- Source: Traktorenlexikon, “Someca SOM 35”