Massey Ferguson MF 373 (A) vs VALMET 355 (355/4)

12 material differences

Tractor one

1987–1994

No measured PTO figure

Tractor two

1990–1994

No measured PTO figure

Which should you choose?

Read our verdict on the MF 373 (A) and the 355 (355/4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 373 (A) and VALMET 355 (355/4), field by field
Field	MF 373 (A)	355 (355/4)	Gap
Engine
Engine power, claimed claimed	61.2 hp	60.2 hp	—
Engine declared	Perkins LD 4.236	VALMET TD-33 D 3 or 320 D	differs
Displacement declared	3.87 L	3.30 L	+17% MF 373 (A)
Maximum torque declared	176 lb·ft · 239 N·m	146 lb·ft · 198 N·m	+21% MF 373 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% MF 373 (A)
Clutch declared	Dry and air-cooled double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	—	8.2 gpm · 31.0 L/min	—
Pressure declared	—	4,206 psi · 290 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	5,688 lb · 2,580 kg	+8% 355 (355/4)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,490 lb · 2,490 kg	5,886 lb · 2,670 kg	+7% 355 (355/4)
Wheelbase declared	88.5 in · 2,249 mm	83.1 in · 2,112 mm	+6% MF 373 (A)
Length declared	143.7 in · 3,650 mm	146.1 in · 3,710 mm	—
Width declared	75.8 in · 1,925 mm	77.4 in · 1,965 mm	—
Height declared	90.7 in · 2,305 mm	96.9 in · 2,460 mm	+7% 355 (355/4)
Ground clearance declared	19.1 in · 485 mm	15.9 in · 405 mm	+20% MF 373 (A)
Turning radius, braked declared	12.6 ft · 3.83 m	10.2 ft · 3.10 m	+24% MF 373 (A)
Fuel tank declared	90.9 qt · 86.0 L	77.1 qt · 73.0 L	+18% MF 373 (A)

Source

Source