Massey Ferguson MF 365 (A) vs VALMET 4400

11 material differences · fewer than 12

Tractor one

1988–1997

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the MF 365 (A) and the 4400 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 365 (A) and VALMET 4400, field by field
Field	MF 365 (A)	4400	Gap
Engine
Engine power, claimed claimed	64 hp	66.1 hp	—
Engine declared	Perkins A 4.236	VALMET 320 DS	differs
Displacement declared	3.87 L	3.30 L	+17% MF 365 (A)
Maximum torque declared	181 lb·ft · 246 N·m	177 lb·ft · 240 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry and air-cooled double clutch	Dry double clutch	differs
Hydraulics & hitch
Pump flow declared	—	10.3 gpm · 39.0 L/min	—
Pressure declared	2,466 psi · 170 bar	2,901 psi · 200 bar	+18% 4400
Three-point lift at ends declared	6,373 lb · 2,891 kg	6,294 lb · 2,855 kg	—
Rear PTO speeds declared	540/540E rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	5,712 lb · 2,591 kg	6,151 lb · 2,790 kg	+8% 4400
Wheelbase declared	90.0 in · 2,286 mm	83.1 in · 2,112 mm	+8% MF 365 (A)
Length declared	149.6 in · 3,800 mm	149.2 in · 3,790 mm	—
Width declared	72.8 in · 1,850 mm	80.0 in · 2,032 mm	+10% 4400
Height declared	96.1 in · 2,440 mm	94.1 in · 2,390 mm	—
Ground clearance declared	15.7 in · 400 mm	19.9 in · 505 mm	+26% 4400
Turning radius, braked declared	—	12.8 ft · 3.90 m	—
Fuel tank declared	114.1 qt · 108.0 L	100.4 qt · 95.0 L	+14% MF 365 (A)

Source

Source