9 material differences · fewer than 12

Tractor oneMassey Ferguson MF 3060 (A)1986–1992No measured PTO figureTractor twoRenault Ceres 3352000–200471.7 hpMeasured at the PTO · OECD Test 1969

Which should you choose?

Read our verdict on the MF 3060 (A) and the Ceres 335 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

9 material differences · 4 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 3060 (A) and Renault Ceres 335, field by field
FieldMF 3060 (A)Ceres 335Gap
Measured performance
PTO power, measured measured—71.7 hp—
Drawbar power, measured measured—60.9 hp—
Engine
Engine power, claimed claimed76.0 hp——
Engine declaredPerkins A 4.248 LFJohn Deere 4045 DRT 51differs
Displacement declared4.07 L4.53 L+11% Ceres 335
Maximum torque declared201 lb·ft · 272 N·m221 lb·ft · 299.2 N·m+10% Ceres 335
Transmission
Top speed declared18.6 mph · 30 km/h18.6–24.9 mph · 30–40 km/hdiffers
Clutch declaredpedal-operated dry and air-cooled single-disc clutchDry LuK double clutchdiffers
Hydraulics & hitch
Hydraulic control declared—Constant flow—
Pump flow declared13.6 gpm · 51.5 L/min13.5 gpm · 51.1 L/min—
Pressure declared2,277–2,350 psi · 157–162 bar——
Rear PTO speeds declared540/1000 rpm540/1000 rpm—
Weight & dimensions
Unladen weight declared7,859 lb · 3,565 kg8,113–8,289 lb · 3,680–3,760 kgdiffers
Maximum permissible mass declared—12,919 lb · 5,860 kg—
Wheelbase declared93.5 in · 2,375 mm95.8–97.2 in · 2,433–2,470 mm—
Length declared155.9 in · 3,959 mm176.4 in · 4,481 mm+13% Ceres 335
Width declared74.4 in · 1,889 mm73.2–92.1 in · 1,860–2,340 mmdiffers
Ground clearance declared22.2 in · 565 mm16.5–19.3 in · 420–490 mmdiffers
Turning radius, braked declared—12.5–13.3 ft · 3.80–4.05 m—
Fuel tank declared156.4 qt · 148.0 L158.5 qt · 150.0 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Massey Ferguson MF 3060 (A) sources

Source
  • Source: Traktorenlexikon, “Massey Ferguson MF 3060”

Renault Ceres 335 sources

Source
  • Source: OECD test report 1969, 2001
  • Source: OECD test report 1978, 2002
  • Source: Traktorenlexikon, “Renault Ceres 335”