Massey Ferguson MF 2725 or Renault 155-54 TX?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 2725 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 155-54 TX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Renault 155-54 TX suits loader and hydraulic implement work better on this data: 23% (1,630 kg / 3,594 lb) more three-point lift.
  • The Renault 155-54 TX suits road haulage better on this data: 13% (1,000 kg / 2,205 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 2725 and Renault 155-54 TX, with the call on each
QuestionMF 2725155-54 TXCall
Which puts more power through the PTO shaft?108.2 kW (145.1 hp)Traktorenlexikon, “Massey Ferguson MF 2725”106.7 kW (143.1 hp)Traktorenlexikon, “Renault 155-54 TE/TA/TS/TX/TZ R7952”Not comparableNot comparable on power at the PTO shaft: the MF 2725 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 155-54 TX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 2725 and the 155-54 TX.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the MF 2725 and the 155-54 TX.
Which pumps more oil for implements?43.1 L/min (11.4 gpm)Traktorenlexikon, “Renault 155-54 TE/TA/TS/TX/TZ R7952”No figureNo call on hydraulic flow: no figure on record for the MF 2725.
Which lifts more on the three-point hitch?7,220 kg (15,917 lb)Traktorenlexikon, “Massey Ferguson MF 2725”8,850 kg (19,511 lb)Traktorenlexikon, “Renault 155-54 TE/TA/TS/TX/TZ R7952”AheadThe Renault 155-54 TX has 23% more lift (1,630 kg / 3,594 lb) than the Massey Ferguson MF 2725 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?6,100 kg (13,448 lb)Traktorenlexikon, “Massey Ferguson MF 2725”6,750 kg (14,881 lb)Traktorenlexikon, “Renault 155-54 TE/TA/TS/TX/TZ R7952”Ahead (a fact, not an advantage)The Renault 155-54 TX is 11% heavier (650 kg / 1,433 lb) than the Massey Ferguson MF 2725 (both unladen weight, as stated by the source).
Which may carry more ballast and load?7,500 kg (16,535 lb)Traktorenlexikon, “Massey Ferguson MF 2725”8,500 kg (18,739 lb)Traktorenlexikon, “Renault 155-54 TE/TA/TS/TX/TZ R7952”AheadThe Renault 155-54 TX has 13% higher maximum permissible mass (1,000 kg / 2,205 lb) than the Massey Ferguson MF 2725 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?16Traktorenlexikon, “Massey Ferguson MF 2725”16Traktorenlexikon, “Renault 155-54 TE/TA/TS/TX/TZ R7952”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the MF 2725 and the 155-54 TX.
Which is faster on the road?35 km/h (21.7 mph)Traktorenlexikon, “Massey Ferguson MF 2725”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault 155-54 TE/TA/TS/TX/TZ R7952”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 2725”540/1000 rpmTraktorenlexikon, “Renault 155-54 TE/TA/TS/TX/TZ R7952”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 2725”No figureNo call on PTO independence: not stated for the 155-54 TX.
Which drives on both axles?4WDTraktorenlexikon, “Massey Ferguson MF 2725”4WDTraktorenlexikon, “Renault 155-54 TE/TA/TS/TX/TZ R7952”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1985–19871989–1990EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Renault 155-54 TX has 23% more lift (1,630 kg / 3,594 lb) than the Massey Ferguson MF 2725 (both lift at the hitch ends, as stated by the source).
  • The Renault 155-54 TX is 11% heavier (650 kg / 1,433 lb) than the Massey Ferguson MF 2725 (both unladen weight, as stated by the source).
  • The Renault 155-54 TX has 13% higher maximum permissible mass (1,000 kg / 2,205 lb) than the Massey Ferguson MF 2725 (both maximum permissible mass, as stated by the source).
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the MF 2725 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 155-54 TX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources