Massey Ferguson MF 2625 vs VALMET 6400-4

10 material differences · fewer than 12

Tractor one

1985–1986

No measured PTO figure

Tractor two

1991–2007

No measured PTO figure

Which should you choose?

Read our verdict on the MF 2625 and the 6400-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 2625 and VALMET 6400-4, field by field
Field	MF 2625	6400-4	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	Perkins A 6.354-4	VALMET 420 DS/420 DW/420 DWRE/44 ET	differs
Displacement declared	5.80 L	4.40 L	+32% MF 2625
Maximum torque declared	269 lb·ft · 365 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Pedal-operated dry single-plate clutch	—
Hydraulics & hitch
Pump flow declared	—	18.0 gpm · 68.2 L/min	—
Three-point lift at ends declared	12,081 lb · 5,480 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,015 lb · 5,450 kg	9,259 lb · 4,200 kg	+30% MF 2625
Maximum permissible mass declared	16,535 lb · 7,500 kg	16,535 lb · 7,500 kg	—
Wheelbase declared	107.3 in · 2,726 mm	91.6 in · 2,326 mm	+17% MF 2625
Length declared	200.0 in · 5,080 mm	173.5 in · 4,408 mm	+15% MF 2625
Width declared	91.3 in · 2,320 mm	78.1 in · 1,985 mm	+17% MF 2625
Height declared	113.4 in · 2,880 mm	107.7 in · 2,735 mm	+5% MF 2625
Ground clearance declared	17.7 in · 450 mm	18.1 in · 460 mm	—
Turning radius, braked declared	16.1 ft · 4.90 m	13.8 ft · 4.20 m	+17% MF 2625
Fuel tank declared	225.1 qt · 213.0 L	174.4 qt · 165.0 L	+29% MF 2625

Source

Source