3 material differences · fewer than 12
Tractor oneMassey Ferguson MF 154 (A)1973–1983No measured PTO figureTractor twoMassey Ferguson MF 254 S (A)1982–1987No measured PTO figure
Which should you choose?
Read our verdict on the MF 154 (A) and the MF 254 S (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
3 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | MF 154 (A) | MF 254 S (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 50.0 hp | 46.4 hp | +8% MF 154 (A) |
| Engine declared | Perkins AD 3.152 S | Perkins A 3.152 S | differs |
| Displacement declared | 2.50 L | 2.50 L | — |
| Maximum torque declared | 127 lb·ft · 173 N·m | 131 lb·ft · 178 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal operated dry and air cooled LUK double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 7.1 gpm · 27.0 L/min | 7.4 gpm · 28.0 L/min | — |
| Pressure declared | 2,418 psi · 166.7 bar | — | — |
| Three-point lift, at the coupling points declared | 3,362 lb · 1,525 kg | 3,664 lb · 1,662 kg | +9% MF 254 S (A) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,475 lb · 2,030 kg | 5,776 lb · 2,620 kg | +29% MF 254 S (A) |
| Wheelbase declared | 81.9 in · 2,080 mm | 81.1 in · 2,060 mm | — |
| Length declared | 138.6 in · 3,520 mm | 141.7 in · 3,600 mm | — |
| Width declared | — | 70.9 in · 1,800 mm | — |
| Ground clearance declared | 12.6 in · 320 mm | 12.2 in · 310 mm | — |
| Turning radius, braked declared | 10.9 ft · 3.31 m | — | — |
| Fuel tank declared | 65.5 qt · 62.0 L | 65.5 qt · 62 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 154 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 154”
- Source: Traktorenlexikon, “Massey Ferguson MF 255”
Massey Ferguson MF 254 S (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 254 (S)”