Massey Ferguson MF 6255 (A) vs VALMET 6400-4

10 material differences · fewer than 12

Tractor one

1999–2003

No measured PTO figure

Tractor two

1991–2007

No measured PTO figure

Which should you choose?

Read our verdict on the MF 6255 (A) and the 6400-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 6255 (A) and VALMET 6400-4, field by field
Field	MF 6255 (A)	6400-4	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	Perkins 1004.40 TWG	VALMET 420 DS/420 DW/420 DWRE/44 ET	differs
Displacement declared	3.99 L	4.40 L	+10% 6400-4
Maximum torque declared	253 lb·ft · 343 N·m	—	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal operated hydraulic VALEO multi-plate clutch	Pedal-operated dry single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	25.3 gpm · 95.7 L/min	18.0 gpm · 68.2 L/min	+40% MF 6255 (A)
Pressure declared	3,336 psi · 230 bar	—	—
Three-point lift at ends declared	9,370 lb · 4,250 kg	—	—
Rear PTO speeds declared	540/1000/540E/1000E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,248 lb · 4,195 kg	9,259 lb · 4,200 kg	—
Maximum permissible mass declared	19,401 lb · 8,800 kg	16,535 lb · 7,500 kg	+17% MF 6255 (A)
Wheelbase declared	97.8 in · 2,485 mm	91.6 in · 2,326 mm	+7% MF 6255 (A)
Length declared	171.3 in · 4,350 mm	173.5 in · 4,408 mm	—
Width declared	81.5 in · 2,071 mm	78.1 in · 1,985 mm	—
Height declared	112.2 in · 2,850 mm	107.7 in · 2,735 mm	—
Ground clearance declared	16.9 in · 430 mm	18.1 in · 460 mm	+7% 6400-4
Turning radius, braked declared	—	13.8 ft · 4.20 m	—
Fuel tank declared	137.4 qt · 130.0 L	174.4 qt · 165.0 L	+27% 6400-4

Source

Source