11 material differences · fewer than 12
Tractor oneMassey Ferguson MF 5425 (A)2003–2011No measured PTO figureTractor twoNew Holland TN 75 DA/SA2003–2008No measured PTO figure
Which should you choose?
Read our verdict on the MF 5425 (A) and the TN 75 DA/SA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | MF 5425 (A) | TN 75 DA/SA | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74.0 hp | 75.0 hp | — |
| Engine declared | Perkins 1104 C-44 | IVECO 8035.25 | differs |
| Displacement declared | 4.40 L | 2.93 L | +50% MF 5425 (A) |
| Maximum torque declared | 217 lb·ft · 294 N·m | 203 lb·ft · 275 N·m | +7% MF 5425 (A) |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | pedal or electrohydraulically operated wet Valeo multi-disc clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | — | 15.6 gpm · 58.9 L/min | — |
| Pressure declared | 2,176 psi · 150 bar | 3,263 psi · 225 bar | +50% TN 75 DA/SA |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,697 lb · 3,945 kg | 5,214 lb · 2,365 kg | +67% MF 5425 (A) |
| Maximum permissible mass declared | 16,667 lb · 7,560 kg | — | — |
| Wheelbase declared | 97.0 in · 2,464 mm | 81.5 in · 2,070 mm | +19% MF 5425 (A) |
| Length declared | 165.7 in · 4,210 mm | 141.8 in · 3,601 mm | +17% MF 5425 (A) |
| Width declared | 79.3–100.4 in · 2,014–2,550 mm | 73.5–95.6 in · 1,867–2,428 mm | differs |
| Ground clearance declared | 18.3 in · 464 mm | 13.9 in · 353 mm | +31% MF 5425 (A) |
| Fuel tank declared | — | 56.0 qt · 53.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 5425 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 5425”
New Holland TN 75 DA/SA sources
- Source: Traktorenlexikon, “New Holland TN75 DA/SA”
- Source: Traktorenlexikon, “Steyr 375 Kompakt”