Massey Ferguson MF 4215 (A) or New Holland TN 55 D/S (A)?

Which should you choose?

On performance, every comparable figure that differs favours the New Holland TN 55 D/S (A): three-point lift. It is also ahead on forward gears and PTO speeds.

  • The New Holland TN 55 D/S (A) suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
  • The New Holland TN 55 D/S (A) suits loader and hydraulic implement work better on this data: 25% (530 kg / 1,168 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 4215 (A) and New Holland TN 55 D/S (A), with the call on each
QuestionMF 4215 (A)TN 55 D/S (A)Call
Which puts more power through the PTO shaft?31.7 kW (42.5 hp)Traktorenlexikon, “Massey Ferguson MF 4215”31.8 kW (42.6 hp)Traktorenlexikon, “New Holland TN55 D/S”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 4215 (A) and the TN 55 D/S (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the MF 4215 (A) and the TN 55 D/S (A).
Which pumps more oil for implements?47.4 L/min (12.5 gpm)Traktorenlexikon, “New Holland TN55 D/S”No figureNo call on hydraulic flow: no figure on record for the MF 4215 (A).
Which lifts more on the three-point hitch?2,140 kg (4,718 lb)Traktorenlexikon, “Massey Ferguson MF 4215”2,670 kg (5,886 lb)Traktorenlexikon, “New Holland TN55 D/S”AheadThe New Holland TN 55 D/S (A) has 25% more lift (530 kg / 1,168 lb) than the Massey Ferguson MF 4215 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,385 kg (5,258 lb)Traktorenlexikon, “Massey Ferguson MF 4215”3,010 kg (6,636 lb)Traktorenlexikon, “New Holland TN55 D/S”Ahead (a fact, not an advantage)The New Holland TN 55 D/S (A) is 26% heavier (625 kg / 1,378 lb) than the Massey Ferguson MF 4215 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?4,000 kg (8,818 lb)Traktorenlexikon, “New Holland TN55 D/S”No figureNo call on maximum permissible mass: no figure on record for the MF 4215 (A).
Which has the wider choice of gears?8 to 12Traktorenlexikon, “Massey Ferguson MF 4215”16 to 44Traktorenlexikon, “New Holland TN55 D/S”AheadThe New Holland TN 55 D/S (A) has 33% more forward gears (4 gears) than the Massey Ferguson MF 4215 (A) (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the MF 4215 (A) and the TN 55 D/S (A).
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 4215”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland TN55 D/S”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Massey Ferguson MF 4215”540/1000 rpmTraktorenlexikon, “New Holland TN55 D/S”AheadThe New Holland TN 55 D/S (A) offers 1000 rpm at the PTO, which the Massey Ferguson MF 4215 (A) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “New Holland TN55 D/S”No figureNo call on PTO independence: not stated for the MF 4215 (A).
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 4215”2WD / 4WDTraktorenlexikon, “New Holland TN55 D/S”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1997–20011999–2003EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The New Holland TN 55 D/S (A) has 25% more lift (530 kg / 1,168 lb) than the Massey Ferguson MF 4215 (A) (both lift at the hitch ends, as stated by the source).
  • The New Holland TN 55 D/S (A) is 26% heavier (625 kg / 1,378 lb) than the Massey Ferguson MF 4215 (A) (both unladen weight, as stated by the source).
  • The New Holland TN 55 D/S (A) has 33% more forward gears (4 gears) than the Massey Ferguson MF 4215 (A) (both forward gears, as stated by the source).
  • The New Holland TN 55 D/S (A) offers 1000 rpm at the PTO, which the Massey Ferguson MF 4215 (A) does not (as stated by the sources).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources